Borika FASTen holders
New
Technical Details:
Designed for mounting two action cameras or one action camera with a lighting (a flashlight). The design comprises two 2-to-3 GoPro mounting connectors and a bracket with a 1/4'' screw thread that is attached to one of them, which are fixed in another 2-to-3 connector on a male ad..
33.00€
Ex Tax:27.27€
New
Technical Details:
Designed for mounting an action camera and lighting (a flashlight) in a 2-to-3 GoPro mounting connector of other holders. The design includes two 2-to-3 connectors, a bracket with a 1/4'' screw thread, and an Hf030 holder for lighting. You can mount the whole structure into any 2-..
26.00€
Ex Tax:21.49€
New
Technical details:
Designed for mounting various carp gear. The design consists of an adapter with bottom external splines shaped as a 12 pointed star, and a disk, equipped with a standard thread for carp gear. The adapter has an O-ring. The diameter of the top part of the adapter is 34 mm. The main..
17.50€
Ex Tax:14.46€
New
Technical details:
Designed for creating assemblies with accessories that are provided with a tilt joint. The double fixation system allows for reducing the oscillations of the structure and makes it more rigid. The assembly consists of an adapter shaped as a 12 pointed star with side 27.7° splines..
9.00€
Ex Tax:7.44€
Technical details:It is intended for lowering and hoisting anchors weighing up to 8 kg. The kit includes an Al002 holder and an FMp224 mounting system. The design of the holder comprises a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, ..
36.00€
Ex Tax:29.75€
New
Technical Details:
It is intended for installation on a vessel of awning tubular structures with an inner tube diameter of 32 mm or an outer diameter of 22 mm. The design consists of a tube joint, fastened to a male adapter shaped as a 12 pointed star by a U-joint. The assembly includes fasteners: t..
17.00€
Ex Tax:14.05€
New
Technical Details:
It is intended for installation on a vessel of awning tubular structures with an outer tube diameter of 22 mm. The design consists of a body with a male adapter shaped as a 12 pointed star and a plastic tube holder, fastened together by a U-joint with an M5*20 DIN 912 screw and an..
10.50€
Ex Tax:8.68€
Technical Details:
The system is designed to mount accessories provided with a male adapter shaped as a 12 pointed star on tubes of Ø 20 — 32 mm and surfaces from 10 to 32 mm thick without drilling. Consists of an Fs219 mount and a bench mounting pad. The design of the bench pad includes a bracket, ..
49.01€
Ex Tax:40.50€
Technical Details:
Designed for fixing accessories provided with a male adapter shaped as a 12 pointed star to rails and tracks of Ø from 19 to 48 mm, and using an extender — of Ø from 42 to 70 mm. Consists of an Fs219 mount and a clamp mounting pad, designed in the form of 2 jaws, fastened together..
43.00€
Ex Tax:35.54€
Technical Details:
Designed for fixing accessories with a male adapter shaped as a 12 pointed star to rails and tracks of Ø from 19 to 48 mm, and using an extender — of Ø from 42 to 70 mm. Consists of two Fs219 mounts and a clamp mounting pad. The clamp is designed in the form of 2 jaws, fastened to..
50.11€
Ex Tax:41.41€
Technical Details:
This mount is designed for fixing accessories provided with male adapters shaped as a 12 pointed star, and adding them a tilt option. The design comprises an accessory mount and an adapter with 27.7 side splines fastened together in tilt joint with M6*50 DIN 931 bolt and an M6 DIN..
18.50€
Ex Tax:15.29€
Technical Details:
Designed for mounting an action camera at a distance of 400 mm from the place of installation on the vessel. The assembly includes an Ng002 swivel-tilt camera holder and an Ex400 extender. The design of the holder consists of a bracket with a 1/4'' screw thread, a 2-to-3 GoPro mou..
46.00€
Ex Tax:38.02€
New
Technical details:
Is intended for making assemblies with RAM® accessories. The set includes 2 Rf264-2 adapters. The design of each comprises an adapter shapes as a 12 pointed star, and a connector with 30° internal short splines, connected to a fastening for RAP-B-366U with an M6*70 DIN 912 screw a..
14.00€
Ex Tax:11.57€
New
Technical details:
Designed to install in BORIKA FASTen® mounting systems accessories from different manufacturers designed to be mounted on a 1.5" (38 mm) ball. The design consists of an adapter made as a one-piece molded product of fiberglass reinforced polyamide, on the bottom side of which there..
13.50€
Ex Tax:11.16€
New
Technical details:
Designed to complement accessories with more flexible adjusting options. Consists of an Ab038 ball adapter and an Sb038 socket. The Ab038 has a 1.5" (38 mm) ball and an adapter shaped as a 12 pointed star, the base of the ball is covered with a layer of polyurethane. The socket co..
27.00€
Ex Tax:22.31€
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, a spring and a roller. Suitable for a halyard of Ø up to 10 mm and a belt u..
19.90€
Ex Tax:16.45€
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, a spring and a roller. Suitable for a halyard of Ø up to 10 mm and a belt u..
20.00€
Ex Tax:16.53€
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The kit includes an Al002 holder and an FMp224 mounting system. The design of the holder comprises a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt,..
36.00€
Ex Tax:29.75€
Technical details:
Designed for fixing accessories at a 250 mm distance from installation place. The assembly includes a compact mount inserted into an extender tube. Its 27.7°side splines are connected to the adapter's splines using an M6*50 DIN 933 screw and an M6 DIN 934 nut. The tilt position is..
34.00€
Ex Tax:28.10€
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as a swivel male adapter shaped as a 12 pointed star. The holder can..
19.00€
Ex Tax:15.70€
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as a swivel male adapter shaped as a 12 pointed star. The holder can..
19.00€
Ex Tax:15.70€
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as HLt T-Track adapter. Can be mounted on the T-Track of aluminium b..
23.99€
Ex Tax:19.83€
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as HLt T-Track adapter. Can be mounted on the T-Track of aluminium b..
23.99€
Ex Tax:19.83€
Technical Details:
Designed to be used as a fastening or mooring device. Made as a one-piece, molded product of fiberglass-reinforced polyamide. The male adapter of the ring is shaped as a 12 pointed star and equipped with an O-ring. The product can be 360° rotated around the axis in 30° increments...
5.51€
Ex Tax:4.55€
New
Technical Details:Designed for installation of an Fs219 mount on the surface of an inflatable vessel. Thanks to the increased gluing area (140 x 140 mm), the pad can be used with accessories that require increased loads. It has been made of PVC and reinforced with a fiberglass-reinforced polyamide w..
9.20€
Ex Tax:7.60€
New
Technical Details:Designed for installation of an Fs219 mount on the surface of an inflatable vessel. Thanks to the increased gluing area (140 x 140 mm), the pad can be used with accessories that require increased loads. It has been made of PVC and reinforced with a fiberglass-reinforced polyamide w..
9.20€
Ex Tax:7.60€
New
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 305 mm. The design consists of a Ø 25 mm, L — 255 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 D..
22.00€
Ex Tax:18.18€
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 205 mm. The design consists of a Ø 25 mm, L — 155 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 D..
19.00€
Ex Tax:15.70€
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on the transom. The design consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter ..
27.00€
Ex Tax:22.31€
BORIKA Fish Finder Transducer Arm Mount (L — 300 mm) for Inflatable Motorboats black / polymer Ft300
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on the transom. The design consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter ..
31.00€
Ex Tax:25.62€